Note: Will NOT work on Wrangler TJ or TJL Rubicon models
This kit is a MUST if you installed a 2" or taller suspension lift in your 1987-2006 Jeep Wrangler (not needed for body lifted Jeeps). The kit fits all newer production NP 231 transfer cases (1987- up).
Why do I need this kit: A Slip Yoke Eliminator Kit (SYE) will eliminate the need to drop your transfer case in order to avoid drive train vibrations that are caused by taller suspension lift. The purpose of this kit is to replace the slip yoke portion of the NP 231 with a fixed yoke and CV-style drive shaft assembly.
This Rugged Ridge SYE kit is the most complete and strongest kit available. The Mega Short SYE (18676.72) is designed to be used in the same lift applications as the other standard SYE kit (2" and up). The main advantage to the new Mega Short SYE kit is that it allows for a much longer drive shaft to be used (additional 3"). This reduces the angle of the dive shaft and in turn improved bearing and u-joint life, reduces driveline vibrations caused by lifted Jeeps« running short drive shafts. It also has a shorter and stronger main shaft design.
With this kit you will need the following Rear CV Driveshaft: 16592.06.
1 x Mega Short Output Shaft
1 x Output Yoke
1 x Magnetic Speed Sensor
1 x Speed Sensor Retainer Bolt
4 x Output Yoke UNF Washers
1 x Tone Ring with Oiling Holes
4 x Output Yoke UNF 12-Point Bolts
1 x Output Yoke Retainer Bolt
1 x Speed Sensor Retainer Bolt with Washer
1 x Mega Short Output Shaft Housing with Pre-installed Seal, Bearing and C-Clip Ring
Important Notes to Consider Before Purchase
- This SYE Kit will work with Double Carden Style Driveshafts ONLY.
- Woks Only with newer production NP231-J transfer cases on 1987+ Wranglers with an electronic speedometer
- Jeep Wranglers manufactured prior to 1992 will need to be retro fitted with an electronic speedometer
- 5 Year Limited
- Install Time:
- 5+ Hours
- Product Weight:
- 13 lbs