Fabtech 6 inch Long Arm Suspension System, Jeep Wrangler TJ, 1997-02, Black.

Fabtech eliminates the stock link pockets all together so that the upper and lower links can function on the same equal plane. Combine this equal plane geometry with extended length link arms and rotational urethane pivot joints and you have a TJ system that will climb, crawl and walk over just about anything you put in front of it. The extended length link arms mount to a massive one piece welded transfer case crossmember that utilizes the stock transfer case skid plate. Some welding is reccomended during installation.

Other features include adjustable front and rear trac bars, shock mount relocation brackets, pitman arm, oversized sway bar quick disconnect links and performance coil springs. All upper and lower link arms are longer than stock allowing reduced pinion angles throughout the suspension cycle and attach to the stock axle mounts and to the stout sub frame crossmember. Large spherical billet steel pivot joints are encased in a graphite urethane allowing unrestrictive high angle movement and low noise. This 6" system provides clearance for 35x12.50R15 tires.

Note: This kit is available in black powder coat finish only. Image used for illustration purpose only. Actual kit is in Black color.